Victron Phoenix Smart IP43 Charger 24V 25A 3 Outputs
With boat owners in mind this adaptive 5-step charger can provide 25A of charge at 24V to each of three battery banks. Bluetooth enabled, to allow the monitoring of the charger and set alarms straight from a compatible phone.
To see delivery prices please check delivery tab or cart
25% OFF TINNED OCEANFLEX CABLES FOR YOUR INSTALL WHEN YOU ADD THIS ITEM TO YOUR BASKET
You May Also Need
- 3 x 4mm2 Single core tinned battery cable (positive) - this is for installs up to 2m from batteries - further distances will require larger cables so please get in contact.
- 1 x 4mm2 Single core tinned battery cable (negative) - Same as above.
- Ring Crimps
- Victron Phoenix IP43 Power Cable
- Commoning Power Post
- Inline fuse holder and 30A fuse on each positive
Here are some articles that may be useful:
Correctly Sizing Your Battery Charger
With boat owners in mind this adaptive 5-step Phoenix Smart Ip43 charger 24/25(3) can provide either 30A or 50A of charge to each of three battery banks. Or the Phoenix 1+1 model provides 3A to the starter-battery, the rest to the ‘house’ bank. 24V models are available with 16A/25A charge. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features – see the datasheet below.
Features of the Phoenix Smart IP43 Charger 24/25(3)
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage
The Phoenix Smart IP43 charger features our well-known ‘adaptive’ battery management system that can be pre-set to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used.
The right amount of charge: variable absorption time
When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery will be fully charged.
Preventing damage due to excessive gassing: the BatterySafe mode
If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached
Less maintenance and aging when the battery is not in use: the Storage Mode
The Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage Mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Also charges Li-ion (LiFePO₄) batteries
Charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on-off port. Alternatively full control of voltage and current can be achieved with Bluetooth.
Fully programmable charge algorithm
The charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface. Three pre-programmed algorithms can be selected with the mode button on the Phoenix Smart IP43 Charger.
VE.Direct interface
For a wired data connection to a Color Control panel, PC or other devices. Please see the VictronConnect app under Downloads / Software on our website.
Programmable relay
You can programme the Phoenix Smart IP43 Charger using the VE.Direct interface or a Bluetooth enabled device to trip on an alarm or other events.
Want to improve battery charging? Why not take a look at the Victron Energy Battery Sense which measures voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided – guaranteeing the correct charge-voltage.
Reasons to buy your Victron equipment or off-grid setup from us
- For safety reasons, 12v and 24v systems have been the mainstay of powering boats for half a century or more so we are well aware of the both fitting and using these systems.
- Everything we know about power and charging from boats is just as applicable to van life or off-grid installations.
- Accurate availability and realistic delivery estimates.
- We have sold thousands of Victron Units as well as everything needed to install and connect.
- If for whatever reason you have a problem, our strong after-sales service will make sure you are looked after and we will drive through any warranty cases as quickly as possible for you.
- Exceptional customer service is our top priority, reflected in our 5-star reviews.
We are excited by the technological improvements in this sector and know how modern lifestyles mean ever-increasing power demands, whether at home or away for your hobby. Having used and worked with this technology as it has emerged, we are not just ‘jumping on the bandwagon’, but sell this as an integral part of helping our customers make the most of their time on their boat or van. This makes us the perfect choice to advise on and supply your power system regardless of where the installation is going.
Here is what one of our customers has said, if you want to check out some more of our 5-star reviews you can see them here.
Delivery
We make sure to list our stock so you know upfront when your order will be with you, most items we send are sent on next-day service as standard however some orders to harder-to-reach locations such as Scottish Islands or Channel Islands may go on a 48-hour delivery to keep delivery costs to a minimum.
Due to the wide range of items we sell shipping costs can vary such as heavy batteries and inflatable boats require a pallet. To see the shipping cost of items use our shipping calculator below.
This is not indicative of the final shipping price, to see that add all your items to your basket or see the delivery costs below.
Delivery costs are as follows - Check the Shipping Type of your product on the 'More Information' tab.
Standard
Mainland UK - £0-150 - £6.5 / £150 - £250 - £3.25 / £250+ - Free
Isle of Mann, Jersey, Gurnsey - £0-150: £15 / £150 - £250: £7.5 / £250+: Free
Hazardous
Mainland UK - £0-150 - £6.5 / £150 - £250 - £3.25 / £250+ Free
Isle of Mann, Jersey, Gurnsey - Unable to ship due to courier restrictions
Long
Mainland UK - £0-500 - £23 / £500+ - Free
Isle of Mann, Jersey, Gurnsey - Please Call for Quote
Inflatable Boat
Mainland UK - £0-500 - £30 / £500+ - Free
Isle of Mann, Jersey, Gurnsey - Please Call for Quote
Heavy Battery
Mainland UK - £0-850 - £26 / £850+ - Free
Isle of Mann, Jersey, Gurnsey - Please Call for Quote
Returns
We have a 30-day returns policy so If for whatever reason you are not happy with your order we can exchange it for another or offer a full refund if you log it with us within 30 days of receipt of the goods.
Find out more about our returns policy here.
CHARGER CALCULATOR
Unsure which battery charger is best for your battery bank? Our easy-to-use calculator will show you the ideal charger output amperage in just a few clicks. Plus, don’t forget to check out our cable size calculator to find the perfect match for your setup. Click below to get started!
| Please select an item to view additional info | |
