Victron IP65 Battery Charger 12V 4A & 0.8A
Out of Stock. Order for delivery in 7-12 daysNo Payment taken until items are shipped
To see delivery prices please check delivery tab or cart
Automotive IP65 Battery Charger 12V/4A – 12V/0,8A with DC connector.
DC connector
Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger.
Less maintenance and aging when the battery is not in use: the Storage Mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 13,2 V to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Protected against overheating and reverse polarity connection
The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection.
Five LED’s for status and mode indication
When connected to the AC supply the STAND-BY LED will turn on. No voltage will be present at the output. After connection to a battery (battery voltage must exceed 8,5V), a choice can be made out of three charge profiles with the MODE button:
- Current limited t0 0,8A and 14,4V absorption voltage. The red LED
- Current 4A and 14,4V absorption voltage. The red LED >14Ah will be on. Application: Flooded, AGM or GEL batteries. Ambient temperature 10-35°C.
- Current 4A and 14,7V absorption voltage. The red LED COLD will be on. Application: Flooded, AGM or GEL batteries. Ambient temperature below 10°C, or batteries requiring a higher charge voltage (OPTIMA spiral cell batteries for example).
Until the battery is fully charged, the red LED CHARGE will be on.
After completion of the charge process, the red LED FULL will be on.
In case of reverse polarity connection, the red LED ! will be on.
If the red LED STANDBY remains on, even after pressing the MODE button, the connection to the battery is interrupted.
The charger always starts in STANDBY mode when connected to the AC supply.
Reasons to buy your Victron equipment or off-grid setup from us
- For safety reasons, 12v and 24v systems have been the mainstay of powering boats for half a century or more so we are well aware of the both fitting and using these systems.
- Everything we know about power and charging from boats is just as applicable to van life or off-grid installations.
- Accurate availability and realistic delivery estimates.
- We have sold thousands of Victron Units as well as everything needed to install and connect.
- If for whatever reason you have a problem, our strong after-sales service will make sure you are looked after and we will drive through any warranty cases as quickly as possible for you.
- Exceptional customer service is our top priority, reflected in our 5-star reviews.
We are excited by the technological improvements in this sector and know how modern lifestyles mean ever-increasing power demands, whether at home or away for your hobby. Having used and worked with this technology as it has emerged, we are not just ‘jumping on the bandwagon’, but sell this as an integral part of helping our customers make the most of their time on their boat or van. This makes us the perfect choice to advise on and supply your power system regardless of where the installation is going.
Here is what one of our customers has said, if you want to check out some more of our 5-star reviews you can see them here.
| Brand | Victron |
|---|---|
| Availability | Out of Stock. Order for delivery in 7-12 days No Payment taken until items are shipped |
| Shipping Type | Standard |
| Voltage (V) | 12 |
| Amps (A) | 0-10 |
| Power (A) | 4 |
| Outputs | 1 |
Delivery
We make sure to list our stock so you know upfront when your order will be with you, most items we send are sent on next-day service as standard however some orders to harder-to-reach locations such as Scottish Islands or Channel Islands may go on a 48-hour delivery to keep delivery costs to a minimum.
Due to the wide range of items we sell shipping costs can vary such as heavy batteries and inflatable boats require a pallet. To see the shipping cost of items use our shipping calculator below.
This is not indicative of the final shipping price, to see that add all your items to your basket or see the delivery costs below.
Delivery costs are as follows - Check the Shipping Type of your product on the 'More Information' tab.
Standard
Mainland UK - £0-150 - £6.5 / £150 - £250 - £3.25 / £250+ - Free
Isle of Mann, Jersey, Gurnsey - £0-150: £15 / £150 - £250: £7.5 / £250+: Free
Hazardous
Mainland UK - £0-150 - £6.5 / £150 - £250 - £3.25 / £250+ Free
Isle of Mann, Jersey, Gurnsey - Unable to ship due to courier restrictions
Long
Mainland UK - £0-500 - £23 / £500+ - Free
Isle of Mann, Jersey, Gurnsey - Please Call for Quote
Inflatable Boat
Mainland UK - £0-500 - £30 / £500+ - Free
Isle of Mann, Jersey, Gurnsey - Please Call for Quote
Heavy Battery
Mainland UK - £0-850 - £26 / £850+ - Free
Isle of Mann, Jersey, Gurnsey - Please Call for Quote
Returns
We have a 30-day returns policy so If for whatever reason you are not happy with your order we can exchange it for another or offer a full refund if you log it with us within 30 days of receipt of the goods.
Find out more about our returns policy here.
CHARGER CALCULATOR
Use our calculator below to see what size battery charger is ideal for your battery bank, we also have our cable size calculator for the ideal cable size.
| Number of Outputs | 1 |
| Bluetooth Enabled | No |
| Warranty | 5 Years |
| Country of Manufacture | China |
| Voltage | 12V |
| Dimensions | H42 x W61 x D185mm |
| Protection Category | IP65 |
| Charge Current | 4A or 0,8A |
| Input Voltage | 200-265V |
| GTIN | 8719076002161 |
| Plug Type | CEE 7/16 |
| Weight | 0.56Kg |
