Recently Viewed

Victron Skylla-TG Charger 24V/30A (90 - 265VAC)

Victron Skylla-TG Charger 24V/30A (90 - 265VAC)
  Zoom
Our Price:  £888.99(Inc. 20% VAT)
+

Part Number:  SDTG2400303
Brand:  Victron
Amps (A):  30-40

Availability:  

Standard UK Delivery for this Product is 5-10 days.

Victron Skylla-TG Charger 24V/30A (90 - 265VAC)

The Skylla charger system has one full rated output and one 4 Amp output.

The 4 Amp output is intended to maintain an engine start battery. This output is provided by a separate charging circuit to the main outputs. It is a constant voltage float charge output only, to prevent overcharging the engine start battery.

The charge voltage can be precisely adjusted to suit any battery system.

Charge voltage can be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance.

An external sensor allows the user to measure battery temperature and compensate charge voltage accordingly.

Perfect chargers for any type of battery

Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. In particular, sealed maintenance free batteries must be charged correctly in order to ensure a long service life. Overvoltage will result in excessive gassing and venting of a sealed battery. The battery will dry out and fail.

Suitable for AC and DC supply (AC-DC and DC-DC operation)

Except for the 3 phase input models, the chargers also accept a DC supply.

Controlled charging

Every TG charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes.

Use of TG chargers as a power supply

As a result of the perfectly stabilized output voltage, a TG charger can be used as a power supply if batteries or large buffer capacitors are not available.

Two outputs to charge 2 battery banks (24V models only)

The TG chargers feature 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery.

To increase battery life: temperature compensation

Every Skylla TG charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting.

Battery voltage sense

In order to compensate for voltage loss due to cable resistance, TG chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage. 

Battery Connection: M8 Studs

Dimensions (hxwxd): 365x250x147mm

Weight: 5.5kg

 

 


Free Delivery

On Orders Over £100

(UK Standard Shipping Only)

Call 01383 807 444