Follow us
 
  Instagram
NO PRICE MATCH PROMISE
just fair pricing / more info
 
HALF PRICE UK STANDARD DELIVERY
on orders over £200* / more info
 
BUY WITH CONFIDENCE
see what other customers say / more info
Victron Energy Argofet 100-3 Three Batteries 100A – ARG100301020R
  Zoom
 Victron Energy Argofet 100-3 Three Batteries 100A – ARG100301020RVictron Energy Argofet 100-3 Three Batteries 100A – ARG100301020R 

Victron Energy Argofet 100-3 Three Batteries 100A – ARG100301020R

£111.99 Save £16.41 (RRP £128.40)  
+

Part Number:  ARG100301020
Brand:  Victron
Product:  Isolator
Amps (A):  50-100

Availability:  

Delivery in 2-3 days

Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

 

In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.

 

When using ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. Care should taken however to keep cable lengths short and of sufficient cross section.

 

Example: When a current of 100 A flows through a cable of 50 mm2 cross section (AWG 0) and 10 m length (30 ft), the voltage drop over the cable will be 0,26 Volt. Similarly a current of 50 A through a cable of 10 mm2 cross section (AWG 7) and 5 m length (15 ft) will result in a voltage drop of 0,35 Volt!

 

Alternator energize input

Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start. The new Argofet isolators have a special current limited energize input that will power the B+ when the engine run/stop switch is closed.

Specification

Maximum Charge Current (A)100
Maximum Alternator Current (A)100
Number Of Batteries3
ConnectionM8 Bolts
DimensionsH65 x W120 x D200mm
Weight (kg)1.4
Warranty5 Years
Country of ManufactureIndia


Please see our COVID-19 response here

New Products Coming Soon!!

 

 

Call Us On 
01383 807444