Procom 1.30m Poly-Coated - Glassfibre Antenna - 155 - 175 MHz
This multi-purpose, omnidirectional, 0 dBd, rod-type base station and marine antenna covers the 160 MHz band in three models with 10 MHz overlap and can be used in a wide variety of applications.
The broad-banded ½ λ dipole antenna element is sealed in a high-quality conical glass fibre tube with low wind-load, which will ensure undisturbed performance by corrosive environments.
Provided with the sturdy “LW” mast mount - a lightweight, multipurpose, epoxy-coated mounting bracket made of non-corrosive aluminium.
The accompanying U-bolts and fittings are made of stainless steel.
To be mounted on vertical or horizontal mast tubes, 16 to 54 mm in outer diameter.
The cable can be led either on the outside or along the inside of the mast tube.
Large bandwidth with respect to both SWR and gain.
CXL 2-1LW is DC-grounded to substantially reduce noise caused by atmospherical discharges and consequently shows a DC-short across the coaxial cable.
The CXL 2-1LW is a vibration-proof, lightweight, slim-line, corrosion-resistant, modern style base station and marine antenna.
-ANTENNA TYPE½ λ coaxial dipol, broad-banded
-FREQUENCYCXL 2-1LW/s: 138 - 156 MHz
-CXL 2-1LW/l: 144 - 165 MHz
-CXL 2-1LW/h: 155 - 175 MHz
-IMPEDANCENom. 50 Ω
-GAIN2 dBi 0 dBd
-BANDWIDTH18 - 21 MHz depending on model
-MAX. POWER150 W
-ANTISTATIC PROTECTIONAll metal parts DC-grounded (Connector shows a DC-short)
-TEMP. RANGE-30°C → +70°C
-WIND SURFACE0.0172 m²
-WIND LOAD22 N @ 160 km/h
-Shroud: Polyurethane-coated glass fibre
-Mounting bracket: Seawater resistant aluminium, epoxy-coated
-Clamps: Stainless steel
TOTAL HEIGHTApprox. 1.3 m (Dep. on frequency)
DIA. IN TOP END8 mm
DIA. IN BOTTOM END16 mm
WEIGHTApprox. 760 g
MOUNTINGOn 16 to 54 mm dia. mast tube