Marine Oil is a versatile, highly penetrating air drying oil that can be used alone or added to paint. Used alone it provides a tough, flexible finish, driving out excess moisture and air; displacing it from rusted metal, so stopping rust. Used alone on porous wood surfaces it will saturate and protect the wood from damage caused by moisture and prevent paint from peeling.
Added to any oil or alkyd based coatings Marine Oil will give increased wet edge time, improved flow ability, greater adhesion and unlike damaging thinners, will maintain the inherent quality of the paint without affecting its appearance or drying times.
Using Marine Oil as a rust inhibitor
Marine Oil penetrates through rusted surfaces to the sound metal below, isolating it and protecting it from further rusting. As it is a penetrating oil it can be used directly on the rusted surfaces – it drives out moisture and air and stabilises the metal to protect it from future damage.
On brand new metal surfaces, use Owatrol’s AP 60 instead. If you are looking for a high gloss rusted finish you can also overcoat the surface with Deks Olje D2 high gloss clear oil.
Using Marine Oil to aid adhesion
Marine Oil leaves a bonding film on all surfaces it is used on which maintains the natural look of the surface but allows enhanced adhesion, making it perfect as a foundation for primers or finishing coats. It gives excellent adhesion including on galvanised steel, aluminium, zinc, wood and more. It allows paint to be applied directly to firm rust and is heat resistant up to +175°C.
Using Marine Oil as a paint conditioner
Marine Oil can be mixed into oil-based paints as a paint conditioner when several great benefits. Firstly, it gives the paint rust inhibiting properties and helps prevent rust on painted surfaces – even when rust is already present. It also improves the flow and workability of the paint, maintaining the ‘wet edge’ for longer and reducing brush and roller marks. Finally, it also gives the paint a better viscosity which allows painting work to be carried out in more extreme cold, heat and windy conditions, perfect for the marine environment. Unlike damaging paint thinners it does not alter the inherent qualities or the finish of the paint.
Please note that if you are looking for a product to give this effect but for water-based paints then please use Floetrol instead as it is designed for use in any water-based paint whereas Marine Oil is for use in oil-based paints.
Using Marine Oil for wood impregnation
When used on dry wood surfaces Marine Oil saturates the wood and protects it from damage caused by moisture. It also helps to prevent paint from peeling and protects metal parts such as hinges and latches from corrosion.
Ideal Uses for Marine Oil
- Priming galvanised surfaces with no need for weathering or pickling
- Preventing further damage in heavily rusted surfaces on hulls and tanks
- Improving paint flow when working in cold environments
- Preventing peeling paint on wood surfaces
- Protecting metal parts on wood surfaces hinges and latches
- Assuring better adhesion of finishes
CLICK HERE FOR PRODUCT INFORMATION
|Coverage:||18m2 per litre|
|Tools:||Brush, Roller, Airless or HVLP Sprayer, pump sprayer|
|Suitable for:||Exterior & Interior use|
|Clean up:||White Spirit|
|Drying Time:||Touch Dry: 12 hours, Full Dry: 24 hours depending on temperature and humidity|
|Re-coating Time:||24-48 hours|